Lock Open Compression Gas Spring
Product Description
Our Lock Open Compression Gas Springs consist of a standard compression Gas Spring (G) with a special protection sleeve which is on a pivot mounting. This sleeve automatically locks into place when the Gas Spring has reached its full extension, holding your application in the open position. Quickly release the lock by depressing the sleeve and allowing your application to close.
Standard Features
- 316L Stainless Steel or Mild Steel types available both with Hard Chrome Plated rod.
- Strokes from 10mm to 1000mm - Protection Sleeve may be required on longer strokes.
- Force range 25N to 7500N.
- Valve (V) is standard on all models.
- Wide range of End Fittings.
- All Spring models can be re-pressurised.
- BCP is standard on Mild Steel (E).
- Polished is standard on Stainless (S).
- Ask for the full explanation of each Product Option & Customisation.
- Screw on extenders to increase the length of stock springs
To find out how to measure and check your gas spring, see here.
If you need to discuss your gas springs, you can contact us here
.jpg)
.jpg)
.jpg)
Contact Us if in doubt
+44 (0)1733 57 0008sales@gas-springs.comThank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Copyright Alrose Products Limited